8640 | HEYCO HFC 1-1/2

8640
HEYCO HFC 1-1/2

No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be secured in the panel by the locknut or into an NPT threaded hole. Convex ferrule ensures liquid tight seal. No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths. Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction. Multiple sizes for use with Heyco-Flex Conduit and Tubing. Suitable for indoor/outdoor use; for original equipment manufacturers or field installers. Use of a sealing washer may be required for wet locations.