FLEX-5P W/FL5-HS-2520 | FLEX 5P W/ 1/4-20 UNC

FLEX-5P W/FL5-HS-2520
FLEX 5P W/ 1/4-20 UNC

FLEX-5P: The Sherex FLEX-5P utilizes a Pull to Pressure method of installation. This method allows the same insert type to be installed into varying material thicknesses (within the Grip Range of the part) without any adjustment of the tool. Installs Rivet Nuts from: M3-M10 and 4-40-3/8-16. Push to start nose piece to spin on fastener, and single stage trigger with automatic reverse with manual reverse bypass. Quick change mandrel design. Light weight (4.2 lbs.). Can be suspended from a balancer. Socket head cap screw mandrel. Installs Rivet Nut Studs from M5-M8 and 10-24-5/16-24. Available in an in-line version with split tool available (remote booster for lighter tool). Upgradeable to process monitoring. 5,000 lbs. (22 KN) pulling force at 90 psi and a 7 mm (0.276 in.) of available stroke. 2-3 second cycle time. All aluminum design for improved durability.